Often used commands and manual actions can also be performed by shortcuts. This topic lists all the available shortcuts to speed up your work with INTERACT.
To edit field contents.
To activate the data entry mode for the current selection:
▪Click on the field to be edited.
▪Press F2 or press RETURN
Edit time code values:
Instead of using the drag & drop Time code function, you can change the Time codes of a selected line by using the following shortcuts:
▪To set the start time of a selected line to the time code currently shown in the Observation Controls press CTRL-1
▪To set the end time of a selected line to the time code currently shown in the Observation Controls press CTRL-2
Multimedia controls
All available commands to control your multimedia file(s) do have a corresponding shortcut:
F4 |
F5 |
F6 |
F7 |
F8 |
F9 |
F10 |
F11 |
F12 |
|
|
|
|
|
|
|
|
|
▪To start the video, press F7
▪To pause the video, press F6 (or F7 to toggle)
▪To play the video in reverse at high speed (fast reverse), press F8
▪To search forward at high speed, press F9
▪To view the video frame by frame, press F11
▪To view the video frame by frame in reverse, press F10
▪To position (or rewind) the video at the start, press F4
▪To position (or wind) the video at the end, press F5
To position the video to coded time codes
▪To position the video at its start, press F4.
▪To position the video at its end, press F5.
▪To jump to the onset of the selected Event, press CTRL-3
▪To jump to the offset of the selected Event, press CTRL-4
| TIP: | Those shortcuts are shown in the hints that appear, whenever the cursor is placed on top of the multimedia control buttons for more than 1 second. |
General Shortcuts:
o[STRG] + [N] Creates a new data file
o[STRG] + [O] Opens die File Open dialog
o[STRG] + [S] Saved the current data file
o[STRG] + [X] Cuts the selected part from the file and moves it the the Windows clipboard
o[STRG] + [C] Copies the current selection to the Windows clipboard
o[STRG] + [V] Inserts the content of the Windows clipboard at the current position
o[STRG] + [F] Opens the Find... dialog.
o[STRG] + [H] Opens the Replace... dialog.
•